When cleaning your evaporator coil, there are a few methods you can use to remove dirt effectively. These include using a foaming cleaner, compressed air, a hose, and a vacuum cleaner. The right method depends on the type of dirt and how difficult it is to remove it.
Using a foaming cleaner
Before using a foaming cleaner, make sure that the unit is free of soil. After heavy soils have been removed, apply the cleaner and spread it evenly over the coil surface. The foaming action of the cleaner will break up the debris and rinse it away. If the coil still has deposits, repeat the process.
Foaming cleaners work by foaming, so they are convenient for coil cleaning. Then, spray the foam over the entire coil assembly, and allow it to dry. Once the foaming cleaner has dried, you can enjoy the cool blasts of air from your air conditioner.
Using compressed air
There are a few different ways to clean your evaporator coil. First of all, you can use a mild detergent and warm water solution. This mixture can be applied using a spray bottle. This will loosen dirt and debris that has built up on the coils. Next, you can use a soft cloth to wipe off any remaining particles.
Another option is using white vinegar, which has natural disinfecting properties. It will disrupt any current mold growth and prevent it from forming in the future. Spray this solution onto the coil and allow it to sit for a few minutes. After that, rinse it off using distilled water.
Cleaning with a vacuum cleaner
The first thing to do when cleaning an evaporator coil is to put on protective gloves. You should also use a shop vacuum to remove any bulky debris from the coil. After the vacuum removes the bulky debris, use a mild dishwashing detergent or white vinegar to clean the coils. Apply the cleaner following the package instructions and let it sit for a few minutes before you begin reassembling the air conditioner.
If you find the dirt to be too hard to remove with a vacuum, try a foaming no-rinse cleaner. This will dislodge the dirt from the coil and run into a drain pan. Repeat the procedure as often as necessary to remove any remaining dirt.
Using a hose
You can clean evaporator coils with a hose. When using a hose, be sure to aim it in a direction opposite to the direction the water flows. This way, you’ll be able to evenly spread clean water across the coil. If you’re worried about using a hose on the coil, you can use a spray bottle to apply clean water to the evaporator coil. Once you’ve cleaned the coil, use a towel or hair dryer to dry it.
You can also use an alkaline foamer to clean the coils. This will dissolve dirt and grime. Once you’ve sprayed the cleaning solution on the coils, let it sit for a few minutes. Don’t use too much pressure when spraying the solution because it will damage the coils and cause unwanted splash back. You can use a spray nozzle attached to the hose to spray the solution on the coils. After the cleaning solution has dried, use a wet/dry vacuum to remove any residue.
Using a trained HVAC technician
The efficiency and comfort of your air conditioner depends on your air conditioning unit’s coils. Coil fins are essential components of heat transfer, but they are also fragile and can be difficult to clean. A trained HVAC technician can clean the coils properly. A technician will be able to remove any debris that is blocking the coils and repair them if necessary.
The most important thing to remember when cleaning your evaporator coil is to wear work gloves. Dirt and debris can get inside the coil, causing it to become inefficient at absorbing heat. HVAC technicians use one of three methods to clean your coils. One method involves using low-pressure compressed air to remove dust, while another involves scrubbing the coil with a solution of water and detergent.